Rechargeable li-polymer battery 451225 100mAh 3.7V |
Product Description |
Lithium ion polymer battery |
Battery model: 451225 100mAh 3.7V |
Material of Case Soft Al-film packing foil |
Nominal Capacity:100mAh |
Nominal Voltage:3.7V |
Max Charge Current: 1.0C=100mA |
Max Discharge Current: 1.5 C=150mA |
Charge method CC/CV (constant current/constant voltage) |
Size: 4.5*12*25mm |
Weight: About 2.2g |
Rechargeable battery with no less than 500 times cycle life |
3.7V polymer li-ion battery 451225 100mAh 3.7V |
1) Specification |
No. | Item | Rated Performance | Remark |
1 | Rated Capacity | Typical | 100mAh | Discharge at 0.2C after standard charge fully. |
Minimum | 100mAh |
2 | Nominal Voltage | 3.7V | Mean operation voltage during standard discharge. |
3 | Voltage at end of | 3.0V | Discharge cut-off voltage. |
Discharge |
4 | Charging Voltage | 4.2±0.03V |
|
5 | AC (1KHz) Impedance New Cell Max.(mW) | ≤210mΩ |
|
6 | Standard Charge | Constant Current 0.5C | Charge time: Approx 4.0h. |
Constant Voltage 4.2V |
Cut-off current 0.01C |
7 | Standard Discharge | Constant current 0.2 C |
|
end voltage 3.0V |
8 | Fast Charge | Constant Current 1C | Charge time: Approx 2.5h. |
Constant Voltage 4.2V |
Cut-off current 0.01C |
9 | Fast Discharge | Constant current 1 C |
|
end voltage 3.0V |
10 | Maximum Continuous Charge Current | 1.0C |
|
11 | Maximum Continuous Discharge Current | 1.5C |
|
12 | Operation Temperature Range | Charge: 0~45C | 60±25%RH. |
Discharge: -20~60C | Bare Cell. |
13 | Storage Temperature | Less than 1 year: -20~25C |
|
Range | Less than 3 months: -20~40C |
|
| Less than 1 months: -30~45C |
|
| Less than 12 hour: 45~60C |
|
14 | Storage Humidity Range | 60±25%RH. |
|
15 | Weight | Approx: 2.2g | Whole product |
16 | Product Dimension | Length: Max. 26.5mm | Initial dimension |
Width: Max. 12.5mm |
Thickness: Max. 4.7mm |
17 | Package | Standard International transportation package, based on UN3480 PI965[RLI] Lithium lon Cells/Batteries ONLY |
|
|
|
|
|
2) Electric features: |
|
No. | Item | Type value | Unit |
|
1 | Over charge detection voltage | 4.28±0.03 | V |
|
2 | Over charge detection delay time | 80-200ms |
|
|
3 | Over charge release voltage | 4.08±0.03 | V |
|
4 | Over discharge detection voltage | 3.0±0.08 | V |
|
5 | Over discharge detection delay time | 20-60ms | V |
|
6 | Over discharge release voltage | 3.0±0.25 | V |
|
7 | Over current detection voltage | 150±30mv | V |
|
8 | Over current protection current | 1.8±0.5A | A |
|
9 | Over current detection delay time | 10-20ms |
|
|
10 | Cycle life | ≤500 times(≥70% 0.5C) |
|